763-428-3094 |
||
|
Home > Facilities DMI is fully equipped with the latest state-of-the-art equipment.Equipment1) Haas HL-2BB Turning Center 2-1/2" Thru Spindle With Live Tail Stock 2) Fadal 4020HT-VMC With 21 Tool, Automatic Tool Changer Thru Spindle Coolant, Rigid Tap. Travel 40"X 20"Y 28"Z 3) Series 2 Bridgeport Milling Machines with power feed and digital readouts 1) Leblond 16" x 48" Lathe with 1-1/2 thru spindle-digital readout and coolant 1) Jet Lathe Model GH-1660ZX, 3-1/8 diameter thru spindle with digital readout 1) Hardinge Chucker Model HCT 1) Boyar Schultz surface grinder with 6" x 12" magnetic chuck. 1) 1997 Doall Band Saw model 2013, 20" throat, 13" work height with 45 degree tilt table 1) Doall 10" Power Chop Saw 2) Wilton Square Wheel Belt Sanders 1) Delta 12" disk sander 3) Misc Drill Presses 1) 8 Ton Dennison Hydraulic Press 12" Stroke 3) Arbor Presses (1, 2, and 3 ton) 1) 20 Ton Hydraulic Press 1) Diacro Bender #2 1) Srd Drill Bit Grinder 6) Tapping Heads 3) Horizontal Chamfering Machines 2) Indexing Heads (with 5-C Collets and 3 Jaw Chucks) 1) Fairbanks Digital Scale (25 lbs) 1) Carbide Grinder 1 HP 1) Vibratory Parts Tumbler Inspection Equipment 1) Starrett Surface Plate (24 x 36) 1) Doall 12" Height Gage 4) Dial Bore Gages (.400-6.000) 1) Meyer Gage Pin Set (.011-.750 by .001) 1) Fowler Gage Block Set 1) 0"-3" Thread Mics 1) Misc Calipers-Mics Shop Support 2) 80 Gal 2 Stage air Compressor 1) 50 Gal Kleerflo Cleanmaster Parts Washer 1) 2000 3/4 Ton Chev Delivery Truck 1) 1999 1/2 Ton Chev Delivery Truck
763-428-3094Home | Facilities | Contact |
|
|||
Dahlheimer
Machining, Inc 5685 Quam Avenue NE Suite
101 St. Michael, MN 55376
Phone: 763-428-3094 Fax:
763-428-3095
|
|||||